Connect MS390 unit to MS425 via MPO breakout cables

SOLVED
mkhavari
Just browsing

Connect MS390 unit to MS425 via MPO breakout cables

Greetings,

 

Is there a possibility to connect MS390-48 with a MA-MOD-2X40G module to a pair of MS425-32 switches using MPO breakout cables? Note: We are using the MS425 QSFP+ interfaces for the stacking the two units.

 

Cheers,

 

mkhavari

1 ACCEPTED SOLUTION
cmr
Kind of a big deal
Kind of a big deal

@mkhavari the MS425 does not support breakout cables and nor do all of the traditional Meraki switches.  I am not aware whether the MS390 supports them, but it is easy to find out as the module will be assigned 8 port numbers if it does.

View solution in original post

1 REPLY 1
cmr
Kind of a big deal
Kind of a big deal

@mkhavari the MS425 does not support breakout cables and nor do all of the traditional Meraki switches.  I am not aware whether the MS390 supports them, but it is easy to find out as the module will be assigned 8 port numbers if it does.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels