cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Configuring POE power statically on a Meraki switchport

SOLVED
Highlighted
Getting noticed

Configuring POE power statically on a Meraki switchport

Hi All,

 

Wanted to check if we can statically assign poe power to a Meraki Switchport like in Cisco Catalyst switch.

 

I wanted to check if this is possible on a MS355-48X switch.

 

Thanks for your answers in advance.

 

BR,

 

Soby

1 ACCEPTED SOLUTION

Accepted Solutions
Kind of a big deal

Re: Configuring POE power statically on a Meraki switchport

4 REPLIES 4
Highlighted
Kind of a big deal

Re: Configuring POE power statically on a Meraki switchport

Select switchport or in the "switch ports" tab you can select multiple and do it that way.

 

kYutobi_0-1588858385704.png

 

 

Highlighted
Getting noticed

Re: Configuring POE power statically on a Meraki switchport

Thanks For the reply.. But what I am looking for is that if we can assign a POE power value to a port manually  ie for e.g: assigning 14watts power to a port statically rather than allowing the POE device to draw the power through negotiation.

Kind of a big deal

Re: Configuring POE power statically on a Meraki switchport

Highlighted
Getting noticed

Re: Configuring POE power statically on a Meraki switchport

Thank you.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.