Configuring POE power statically on a Meraki switchport

SOLVED
SobyKuruvilla
Getting noticed

Configuring POE power statically on a Meraki switchport

Hi All,

 

Wanted to check if we can statically assign poe power to a Meraki Switchport like in Cisco Catalyst switch.

 

I wanted to check if this is possible on a MS355-48X switch.

 

Thanks for your answers in advance.

 

BR,

 

Soby

1 ACCEPTED SOLUTION

4 REPLIES 4
kYutobi
Kind of a big deal

Select switchport or in the "switch ports" tab you can select multiple and do it that way.

 

kYutobi_0-1588858385704.png

 

 

Enthusiast

Thanks For the reply.. But what I am looking for is that if we can assign a POE power value to a port manually  ie for e.g: assigning 14watts power to a port statically rather than allowing the POE device to draw the power through negotiation.

No, you can't do this. 

Thank you.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels