Configuring POE power statically on a Meraki switchport

[SobyKuruvilla]

Hi All,

Wanted to check if we can statically assign poe power to a Meraki Switchport like in Cisco Catalyst switch.

I wanted to check if this is possible on a MS355-48X switch.

Thanks for your answers in advance.

BR,

Soby

[kYutobi]

Select switchport or in the "switch ports" tab you can select multiple and do it that way.

[SobyKuruvilla]

Thanks For the reply.. But what I am looking for is that if we can assign a POE power value to a port manually  ie for e.g: assigning 14watts power to a port statically rather than allowing the POE device to draw the power through negotiation.

[jdsilva · Accepted solution]

No, you can't do this. 

[SobyKuruvilla]

Thank you.