Change Management VLAN with a 'local' VLAN

ExSL
Just browsing

Change Management VLAN with a 'local' VLAN

Hello,

 

I'm currently facing an issue.

My both switch have an IP in the VLAN 1 (DHCP), Uplink on Sw01 Port10. I want to change this IP with a static IP on VLAN 182. The VLAN 182 is configured on my switch only. So I used those settings :
Screenshot_9.png

 

 

 

 

 

An IP on the VLAN 182 range.

 

 

/24

 

 

 

IP of the Meraki MS on the VLAN 182

 

 

VLAN ID

 

 

 

 

 

 

 

 

 

 

 

 

This configuration doesn't work. The switch management remain on VLAN 1 sending traffic for management trough de uplink interface.

 

BR,

4 REPLIES 4
RaphaelL
Kind of a big deal
Kind of a big deal

Hi ,

 

Have you configured the vlan 182 under the page Switch -> Switch Settings -> VLAN configuration -> 
Management VLAN ?

 

https://documentation.meraki.com/MS/Other_Topics/Switch_Settings

Hi,

 

Yes I did... 

PhilipDAth
Kind of a big deal
Kind of a big deal

The switch attempts to apply the configuration, and if it can't talk to the Meraki Dashboard, rolls the change back restoring connectivity.

 

Maybe start by plugging a notebook into VLAN182 on that switch and verify it can get to the Internet.

We tried to connect a computer on VLAN 182. And this computer can reach internet.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels