Change Management VLAN with a 'local' VLAN

[ExSL]

Hello,

I'm currently facing an issue.

My both switch have an IP in the VLAN 1 (DHCP), Uplink on Sw01 Port10. I want to change this IP with a static IP on VLAN 182. The VLAN 182 is configured on my switch only. So I used those settings :

An IP on the VLAN 182 range.

/24

IP of the Meraki MS on the VLAN 182

VLAN ID

This configuration doesn't work. The switch management remain on VLAN 1 sending traffic for management trough de uplink interface.

BR,

[RaphaelL]

Hi ,

Have you configured the vlan 182 under the page Switch -> Switch Settings -> VLAN configuration -> 
Management VLAN ?

https://documentation.meraki.com/MS/Other_Topics/Switch_Settings

[ExSL]

Hi,

Yes I did... 

[PhilipDAth]

The switch attempts to apply the configuration, and if it can't talk to the Meraki Dashboard, rolls the change back restoring connectivity.

Maybe start by plugging a notebook into VLAN182 on that switch and verify it can get to the Internet.

[ExSL]

We tried to connect a computer on VLAN 182. And this computer can reach internet.