Authentication Meraki on switch

[HugoS]

Hello everyone,

I have a MS 220 and I try to make the authentication with the Meraki authentication in my access policy and I configured the port on the switch.
When I try to plug the client on the switch, I don't have any connection page. I join directly the Guest Vlan.

I called the support and they said "have a look to my network card" but for me it's good.

I don't know what to do.

Thank you guys,

regards.

[Steinbep]

This isn't a captive portal (splash page) setup like you would on the wireless side. You will need to setup your ethernet interface to authenticate the device with the Meraki user information. 

[kYutobi]

@HugoS You need to have an MX unit to do this for wired clients.

[HugoS]

OK thank you I will try !

@kYutobi  I have a MX64 

[HugoS]

I searched more informations about the access policy, but I don't really understand what I need to do.

someone can help me ? I will be very enjoyed.

Thank you.

Hugo

[kYutobi]

https://documentation.meraki.com/MX/Access_Control_and_Splash_Page/Splash_Page

Hope this helps. @HugoS 

[HugoS]

I took a look and try it but I'm already in my guest Vlan 

[kYutobi]

Did you configure your splash page for Guest VLAN? 

[HugoS]

I configured the splash page for all Vlans. When I try to plug the PC on the port with the access policy, it's like the PC bypass the meraki authentication so I join the Guest Vlan.

When I called the support they say my switch give the request but the PC doest'n respond

[kYutobi]

What VLAN is your switchport in? Also try different VLANs to see if a page pops up.

[HugoS]

My switchport is in the Vlan 2, so when I plug my PC I must be in the Vlan2. But I don't have any authentication so I join the Guest Vlan (Vlan 3). configure like the screen before

[HugoS · Accepted solution]

I found it !

Just need to configure the authentication IEEE 802.1X on windows.

I followed this link to configure it.

https://www.virtualizationhowto.com/2018/12/configure-windows-10-for-802-1x-user-authentication/

Thank you for your help.

Hugo