cancel
Showing results for 
Search instead for 
Did you mean: 

Authentication Meraki on switch

SOLVED
Highlighted
Here to help

Authentication Meraki on switch

Hello everyone,

I have a MS 220 and I try to make the authentication with the Meraki authentication in my access policy and I configured the port on the switch.
When I try to plug the client on the switch, I don't have any connection page. I join directly the Guest Vlan.

I called the support and they said "have a look to my network card" but for me it's good.

I don't know what to do.

Thank you guys,

regards.

Screenshot_1.png

1 ACCEPTED SOLUTION

Accepted Solutions
Here to help

Re: Authentication Meraki on switch

I found it !

Just need to configure the authentication IEEE 802.1X on windows.

I followed this link to configure it.

https://www.virtualizationhowto.com/2018/12/configure-windows-10-for-802-1x-user-authentication/

Thank you for your help.

Hugo

11 REPLIES 11
Getting noticed

Re: Authentication Meraki on switch

This isn't a captive portal (splash page) setup like you would on the wireless side. You will need to setup your ethernet interface to authenticate the device with the Meraki user information. 

Head in the Cloud

Re: Authentication Meraki on switch

@HugoS You need to have an MX unit to do this for wired clients.

Here to help

Re: Authentication Meraki on switch

OK thank you I will try !

@kYutobi  I have a MX64 

 

 

 

Here to help

Re: Authentication Meraki on switch

I searched more informations about the access policy, but I don't really understand what I need to do.

someone can help me ? I will be very enjoyed.

Thank you.

Hugo

Head in the Cloud

Re: Authentication Meraki on switch

Here to help

Re: Authentication Meraki on switch

I took a look and try it but I'm already in my guest Vlan 

Head in the Cloud

Re: Authentication Meraki on switch

Did you configure your splash page for Guest VLAN? 

Here to help

Re: Authentication Meraki on switch

I configured the splash page for all Vlans. When I try to plug the PC on the port with the access policy, it's like the PC bypass the meraki authentication so I join the Guest Vlan.

When I called the support they say my switch give the request but the PC doest'n respond

Head in the Cloud

Re: Authentication Meraki on switch

What VLAN is your switchport in? Also try different VLANs to see if a page pops up.

Here to help

Re: Authentication Meraki on switch

My switchport is in the Vlan 2, so when I plug my PC I must be in the Vlan2. But I don't have any authentication so I join the Guest Vlan (Vlan 3). configure like the screen before

Here to help

Re: Authentication Meraki on switch

I found it !

Just need to configure the authentication IEEE 802.1X on windows.

I followed this link to configure it.

https://www.virtualizationhowto.com/2018/12/configure-windows-10-for-802-1x-user-authentication/

Thank you for your help.

Hugo

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels