1Gig uplink on MS130-24X

ammahend
Building a reputation

1Gig uplink on MS130-24X

Hi community, can I connect MS130-24X-HW or MS130-48X-HW uplink with 1Gig although its SFP+ has anyone tried and confirm if it works ?

5 Replies 5
alemabrahao
Kind of a big deal
Kind of a big deal

No, both ends must have the same type of connection and the same speed.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
ammahend
Building a reputation

I am asking if the SFP+ uplink is backwards compatible with 1Gig also or I can only connect 10G SFPs ?

I will obviously connect both sides with 1Gig. I am not going to connect 10G on one side and 1Gig on other side 🙂

ww
Kind of a big deal
Kind of a big deal

If you put a sfp in the sfp+ slot you can

Take a look for supported modules

https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Small-Form_Factor_Plu...

DarrenOC
Kind of a big deal
Kind of a big deal

It will work.  If you have a 1Gbps SFP at both ends then you’re fine.  As @alemabrahao alludes to you can’t mix the SFP types at either end.

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
GIdenJoe
Kind of a big deal
Kind of a big deal

10 Gig SFP+ ports are backwards compatible with 1 Gig SFP's.  25 Gig SFP28 ports are backwards compatible with 10 Gig SFP+ and 1 Gig SFP modules.

100 Gig QSFP28 ports are backwards compatible with 40 Gig QSFP+ ports. 🙂

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels