Missing MV21 Plate

[dkoziupa-sas]

We took a camera down, stored it, and now want to mount it.  We though cannot mount it without the plate.  See the instructions in step 2 and 3 here: MV21 Installation Guide - Cisco Meraki  Does anyone know where to get the plate for a MV21 camera?

[MerakiDave]

@dkoziupa-sas they are not sold separately as replacements, might have to find one 3rd party.  If you only need one also check with your local Cisco/Meraki SE who can ask around if somebody has one.  I have one myself from an old Lab MV21 that sits on a rack and I don't need the mounting plate, so if you only need one, I can send you mine, just PM me. 

[dkoziupa-sas]

Hello @MerakiDave , I sent you a note on my address and let you know that it would be appreciated if you did send the plate.  Will you be sending me a tracking number in the PM I sent you?

[dkoziupa-sas]

@MerakiDave Did you receive the PM you asked me to send you? 

[MerakiDave]

Sorry for that delay, I was away on PTO last week. 

Will PM you now and get this taken care of.

Regards,

Dave

[KarstenI]

Not sure if I get the problem ... In your photo, the plate is visible in the left lower corner ...

[dkoziupa-sas]

@KarstenI Good catch, but I would not be asking if I did not have it.  Luckily I had a picture of the plant in my photos I was able to reference for this chat.  That is not the missing plate.  Make sense?

[MerakiDave · Accepted solution]

On its way! 

[dkoziupa-sas]

Got it - thanks!

[gs419]

@MerakiDave you wouldn't happen to have anymore would you? I've looked everywhere for two replacement plates!

Thanks in advance!