I setup ten MV72 wireless cameras today through the dashboard. I used Chrome with no script blocking extensions. I would set the wireless profile, click save, then cycle to the next camera without going back to the list of cameras.
A few of the cameras properly pulled a wireless profile and joined with the AP that I had setup, but I had set them up one at a time to get used to the process. When I looked at the cameras I'd cycled to and then set the profile on, they showed no profiles assigned.
I set the profiles again, moving from camera to camera using arrow keys, and same thing: no wireless profile was actually saved. I could only save the profiles if I went from camera list into individual cameras.
Anyone else run into this? I got the job done, but sorting out this bug did take a while.