Doubt about MT12 cable extension.

Solved
BFrança
Here to help

Doubt about MT12 cable extension.

Hello guys.

 

I was reading the MT12 documentation and I had a question.
In the Datasheet it says that we can extend up to 2 cables, but are there 2 cables + 1 cable that comes with MT12 or 1 cable + 1 cable that comes with MT12?

 

Thank you for your time and attention.

1 Accepted Solution
PhilipDAth
Kind of a big deal
Kind of a big deal

You can only have one cable per probe.

View solution in original post

6 Replies 6
PhilipDAth
Kind of a big deal
Kind of a big deal

The MT12 comes with one cable that is about 2 meters long.

 

IMG_20210312_084804.jpg

BFrança
Here to help

Yep, but beyond this, we can expand. My question is, if in addition to this we can use 1 or 2 more cables.

PhilipDAth
Kind of a big deal
Kind of a big deal

You can only have one cable per probe.

BFrança
Here to help

I thought so.

 

Thank you guys.

BlakeRichardson
Kind of a big deal
Kind of a big deal

@PhilipDAth  Very old bottle of Jif Powerspray there. 

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.
David-H
Meraki Employee
Meraki Employee

@BFrança,

 

The MT12 only comes with one 8ft cable, however a second cable can be purchased and added to extend the cable length to 16ft.

 

Here's a link to the additional cable on the Meraki website: https://meraki.cisco.com/product/sensors/sensors-accessories/water-leak-detection-cable/

Get notified when there are additional replies to this discussion.