cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

site to site VPN configuration

SOLVED
Conversationalist

site to site VPN configuration

I have configured a site to site VPN setup. 

1. Head office - spoke

2.Datacenter - HUB

3. Branch office - spoke 

 

Head office WAN link 10.131.61.228 switch - DHCP subnets: 10.10.107.0/24, 192.168.1.0/24, 192.168.129.0/24

switch - LAN IP 10.131.20.214 GW - 10.131.20.1

Data center MX 192.168.128.0 VPN settings 10.131.20.0/24

Branch office VPN settings 10.10.109.0/24

 

Please find my screenshot and confirm the configuration is right?

 

 

BR-MX.PNGDC.PNGDC-1.PNGDC-Sw.PNGHO.PNGHO-Sw.PNG

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Kind of a big deal

Re: site to site VPN configuration

I'd just give it a go and see if there are any issues.

3 REPLIES 3
Highlighted
Kind of a big deal

Re: site to site VPN configuration

I'd just give it a go and see if there are any issues.

Meraki Employee

Re: site to site VPN configuration

@sankar I would suggest you to post your network requirement and any challenges if there are.

Network engineers in this community would be able to share ideas / experiences with you if you faced any particular difficulties for your requirement.

Conversationalist

Re: site to site VPN configuration

Thanks. I will check and post the same.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.