Meraki

sankar · ‎Sep 17 2019

I have configured a site to site VPN setup.

1. Head office - spoke

2.Datacenter - HUB

3. Branch office - spoke

Head office WAN link 10.131.61.228 switch - DHCP subnets: 10.10.107.0/24, 192.168.1.0/24, 192.168.129.0/24

switch - LAN IP 10.131.20.214 GW - 10.131.20.1

Data center MX 192.168.128.0 VPN settings 10.131.20.0/24

Branch office VPN settings 10.10.109.0/24

Please find my screenshot and confirm the configuration is right?

PhilipDAth · ‎Sep 17 2019

I'd just give it a go and see if there are any issues.

View solution in original post

PhilipDAth · ‎Sep 17 2019

I'd just give it a go and see if there are any issues.

HitoshiH · ‎Sep 17 2019

@sankar I would suggest you to post your network requirement and any challenges if there are.

Network engineers in this community would be able to share ideas / experiences with you if you faced any particular difficulties for your requirement.

~~If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.~~

The Meraki ECMS exam is now live! Test your knowledge of Meraki and become an official Cisco Meraki Solutions Specialist. More info on the ECMS exam found here.

For information regarding all of Meraki's training offerings, be sure to check out the Meraki Learning Hub.

sankar · ‎Sep 17 2019

Thanks. I will check and post the same.

Meraki

Community

site to site VPN configuration

site to site VPN configuration