Looking at setting up a VPN like this. I want all traffic from "device" to route through MX64 at that site. that site will have a Site to Site VPN to my location here. the MX64 here will connect to our LAN and i need the device traffic to drop into the LAN and then get routed. what would be the config at both sides to make something like this happen.
First question: Is that a third party tunnel or are you using AutoVPN between devices within the same organization?
Second question: Are there other things on Network Left where "Device" lives? Is "Device" the only thing you want to have sending all its data to Network Right?
just a statement, i know that usually over a VPN it drops to LAN. i just need to make sure that "device" is on my corporate LAN so that its traffic routes to my core.
You can use auto VPN and put the remote MX64 into full tunnel mode.
The remote traffic will get routed based on the MX64 route table at your site with the switch.