configure 2 wan ports on MX84

SOLVED
Kieshan
Here to help

configure 2 wan ports on MX84

dear all,

 

I would like to implement the mx84 by using the both wan ports. 1 port will be used for internet only and the second port for a internal wan connection where all the company sites are connected. Will this setup work?

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
PhilipDAth
Kind of a big deal

Re: configure 2 wan ports on MX84

For the company WAN, connect this is a LAN port.  Enable a VLAN, and use the VLAN for doing the routing.

 

https://documentation.meraki.com/MX/Networks_and_Routing/Configuring_VLANs_on_the_MX_Security_Applia... 

View solution in original post

1 REPLY 1
PhilipDAth
Kind of a big deal

Re: configure 2 wan ports on MX84

For the company WAN, connect this is a LAN port.  Enable a VLAN, and use the VLAN for doing the routing.

 

https://documentation.meraki.com/MX/Networks_and_Routing/Configuring_VLANs_on_the_MX_Security_Applia... 

View solution in original post

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.