cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

configure 2 wan ports on MX84

SOLVED
Here to help

configure 2 wan ports on MX84

dear all,

 

I would like to implement the mx84 by using the both wan ports. 1 port will be used for internet only and the second port for a internal wan connection where all the company sites are connected. Will this setup work?

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Kind of a big deal

Re: configure 2 wan ports on MX84

For the company WAN, connect this is a LAN port.  Enable a VLAN, and use the VLAN for doing the routing.

 

https://documentation.meraki.com/MX/Networks_and_Routing/Configuring_VLANs_on_the_MX_Security_Applia... 

View solution in original post

1 REPLY 1
Highlighted
Kind of a big deal

Re: configure 2 wan ports on MX84

For the company WAN, connect this is a LAN port.  Enable a VLAN, and use the VLAN for doing the routing.

 

https://documentation.meraki.com/MX/Networks_and_Routing/Configuring_VLANs_on_the_MX_Security_Applia... 

View solution in original post

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.