allow specific URL to outbound from one WAN

[Abechara]

can i chose a specific URL to use specific wan in my meraki mx as we de for an IP address ? in order when we need to use this url our ip address does not change as we have 2 WAN connectd

[ww]

You can only use ip

Or

With sdwan plus lic you can specifiy from a list of aplications.

You could try a nslookup to the url and add all the IP's from the response. But that response can change over time

[Abechara]

With sd wan plus lic you can specifiy from a list of aplications. what does this mean ?

[ww]

You can find a example here

https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/...

[cmr]

From the SD-WAN & traffic shaping appliance configuration page you can send specific traffic to a particular WAN, see below where CNN and Playstation traffic from 192.168.20.0/24 go to WAN 2 whereas everything else is set to go to WAN 1