I have a few questions.
What is best practice when setting up warm spare?
Can you only use the same model number as a warm spare?
I understand that you would normally have redundant ISPs feeding each MX. But what if you only have a single ISP? Do you connect the warm MX to the main MX? And when you have an issue with the main you manually make the switch?
Solved! Go to solution.
@RichardChen1 wrote:Check this out:
https://www.willette.works/mx-warm-spare/
Yeh... There's falsities in that and I would not recommend you follow that guide. There are some good things in there, but the whole heartbeat thing is not truly possible and very misleading.