WAN description

saravanakumar
Conversationalist

WAN description

Are there any options available for making a WAN description? such as using the name of the service provider for identification rather than WAN 1 and WAN 2.

4 Replies 4
DarrenOC
Kind of a big deal
Kind of a big deal

Hi @saravanakumar , as you can see there is no option to do this 

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
DarrenOC
Kind of a big deal
Kind of a big deal

I’ve seen some use the Notes section on the Appliance Status page to make a mention of each WAN ISP

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
cmr
Kind of a big deal
Kind of a big deal

This is absolutely what I've done, recording the ISP, carrier class and bandwidth there for easy finding.

If my answer solves your problem please click Accept as Solution so others can benefit from it.
Badr-eddine
Getting noticed

Hello, 

 

Other than the notes section, I think you can add a tag to the network indicating the providers. This can help you quickly identify which networks are using which providers and give you an overview

Get notified when there are additional replies to this discussion.