WAN MX84

AdminERB
Comes here often

WAN MX84

Hi everybody,

 

I have a question.

 

Can be set to WAN 1 port two VLAN ID ?

My network provider will give me a trunk port (from the router) on which there are two VLANs. 1. Internet 2. VVN (IP voice)

Is it possible to receive via 1 WAN port?

 

Meraki MX84 he has two WAN port, but WAN 2 I want to use for internet backup.

 

the PBX (phone switchboard) has only one Ethernet input.

I need to add VVN to the network on a separate vlan.

Thank you very much for any advice. 

 

 

4 REPLIES 4
KarstenI
Kind of a big deal
Kind of a big deal

I am not aware that this would be possible. You could split the services with a VLAN-aware-switch on the outside of the MX.

Yes, you're right.

don't you know how to receive internet and VVN to the network via mx?

 

KarstenI
Kind of a big deal
Kind of a big deal

As we only have one possible tag on the WAN-port, I don't see other ways than using the external switch or let the provider deliver the services with two physical interfaces.

MilesMeraki
Head in the Cloud

MX doesn't allow for multiple VIPs/Virtual interfaces on the WAN ports. The only way this would be possible would be to install a layer 2 switch in between your ISP CPE and MX. Trunk from the switch to the ISP CPE and then two access ports on each VLAN from your layer 2 switch to both of your MX WAN interfaces.

Eliot F | Simplifying IT with Cloud Solutions
Found this helpful? Give me some Kudos! (click on the little up-arrow below)
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels