WAN IP's

Unexus
Here to help

WAN IP's

Hi, we're moving over to a MX67 and I'm busy with the configuration.

 

I have

  • 1 internet connection with WAN 5 IP's available.
  • 2 LAN's 

I would like to have something that is called in our current router a WAN IP Alias, 1 phyiscal IP connection, 1 static WAN IP address configured and a few static IP Aliases.

 

Goal:

 

Traffic from LAN1 to the internet is identified on the internet with WAN IP1

Traffic from LAN2 to the internet is identified on the internet with WAN IP2 

 

Is this possible with the MX67 and if so, how?

Or do I need to use one of the LAN ports, switch it to WAN and connect my internet via a switch to Meraki WAN1 and WAN2?

 

Regards, 

Frederik 

2 Replies 2
alemabrahao
Kind of a big deal
Kind of a big deal

You cannot apply this to LAN ports but to a subnet.

 

https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/MX_Load_Balancing_and_Flow_Preferen...

 

alemabrahao_0-1680270484914.png

 

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
ww
Kind of a big deal
Kind of a big deal

You can only PAT to 2 IP's , the ones assigned to the MX wan Ports.

 

1:1 nat you can use also IP's that are not assigned directly to the wan port.

 

So you would be able to use 2 IPs if you are able to connect 2 wan ports to the isp router. Yes you could use a switch for that if the isp router dont have 2 ports

 

Get notified when there are additional replies to this discussion.