VPN Issue

[AnthonyMaddick]

Hi All, 

After some advice, I have set up an MX with a Fibre to the Node NBN Connection in Bridge mode. 

the MX is on the subnet 10.0.0.0/24 and the MX address  is 10.0.0.138

I have enabled client VPN and given it the subnet 192.168.10.0/24

My clients can connect and ping/access some devices (non-windows computer devices, IE nas, phone system) but we cannot ping our file server or any other windows PCs. 

I have created a firewall rule to test to allow all traffic from one subnet to the other. 

Packet capture shows it hits the MX but no response from the device. 

Any ideas?

[Bruce · Accepted solution]

I’d suggest that you may want to look at the firewalls on the Windows server and workstations. It’s possible they have a firewall restriction to only allow access from their local subnet.

[AnthonyMaddick]

Hi Bruce, you have hit the nail on the head.