Using The Same Object Group For Source And Destination On A Rule

SOLVED
Zac123
Here to help

Using The Same Object Group For Source And Destination On A Rule

Hey all:

 

Say I have these two objects:

Object1 = 192.168.1.0/24

Object2 = 192.168.2.0/24

 

Say I have an MX64 with two VLANs:

VLAN1 IP = 192.168.1.1/24

VLAN2 IP = 192.168.2.1/24

 

Say I don't want these subnets to talk to each other.  Could I make an object group including both the above objects and then use that group as the source and destination in a deny firewall rule?  It makes sense to me, I just haven't done it before on Meraki.

1 ACCEPTED SOLUTION
KarstenI
Kind of a big deal
Kind of a big deal

Yes, you can do that in with the MX.

View solution in original post

1 REPLY 1
KarstenI
Kind of a big deal
Kind of a big deal

Yes, you can do that in with the MX.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels