Umbrella address on MX64

route_map
Building a reputation

Umbrella address on MX64

Hi Team

 

I am struggling to change the DNS address for my uplink, i use a dynamic IP address from my ISP.

please check attached

 

route_map_0-1584872504416.png

 

5 REPLIES 5
CptnCrnch
Kind of a big deal
Kind of a big deal

I‘m not sure I fully understand. Are you simply trying to configure the dynamic hostname, or do you want to add your MX as a Network in Umbrella?

 

If you‘re searching for the dynamic hostname:

https://documentation.meraki.com/MX/Other_Topics/Dynamic_DNS_(DDNS)

 

route_map
Building a reputation

MX as a Network in Umbrella?

Hi,

 

You can change the DHCP option for all your client devices behind this MX to have Umbrella DNS.

 

MX DNS setting will only affect the management traffic to Meraki.

If you found this post helpful, please give it kudos. If my answer solved your problem, click "accept as solution" so that others can benefit from it.
route_map
Building a reputation

route_map_0-1584938669774.png

 

I have already done this, or should i use the actual IP addresses?

Did you already set up your network within Umbrella?
Or are you talking about clicking on the pencil icon and changing your DNS to the publicly known OpenDNS IP Addresses?

Here are some guides for you:

https://umbrella.cisco.com/meraki

https://documentation.meraki.com/MR/Other_Topics/Manually_Integrating_Cisco_Umbrella_with_Meraki_Net...
Nolan Herring | nolanwifi.com
TwitterLinkedIn
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels