StealthWatch/NetFlow in Meraki Switch/AP only network ??

SOLVED
Thygesen
Building a reputation

StealthWatch/NetFlow in Meraki Switch/AP only network ??

Hi All You tough Merki persons !! 😀

 

Here's a stupid one for You ..

Beeing raised with Cisco Classic switches etc. we could enable NetFlow on the switches if needed (and purchased).


I have a couple of installations where the infrastructure is Meraki switches and AP's, but not MX centric.

 

Can StealthWatch utilize the switches as probes via the API, as the integration guide explains, but without a MX device ?

 

1 ACCEPTED SOLUTION
CptnCrnch
Kind of a big deal
Kind of a big deal

In a nutshell: no. At least not currently if I'm correctly informed.

 

Stealthwatch is not able to ingest its data via Meraki API. You'd need Netflow for that which is only available on MX.

View solution in original post

3 REPLIES 3
CptnCrnch
Kind of a big deal
Kind of a big deal

In a nutshell: no. At least not currently if I'm correctly informed.

 

Stealthwatch is not able to ingest its data via Meraki API. You'd need Netflow for that which is only available on MX.

Thygesen
Building a reputation

Ah .. That way around.
So .. Get some MX'es in there, activate NetFlow, and get the API interface for StealthWatch going..

 

Thanx

 

CptnCrnch
Kind of a big deal
Kind of a big deal

Well, there's at least one chance: MS390 supports Netflo (and even ETA) too:

https://documentation.meraki.com/MS/Meraki_MS_Beta/MS_Netflow_and_ETA

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels