cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Static routes Meraki MX-100

SOLVED
Conversationalist

Static routes Meraki MX-100

Hi,

 

I have a problem, I am implementing a mx-100 with static routes with different next hop according to the destination. The fact is that when you activate the routes in the table of a next hop the others are deactivated

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Conversationalist

Re: Static routes Meraki MX-100

Hi,

 

I have already solved the problem, for some reason, the Meraki did not support the configuration of 2 ports in different vlans. What I did was to truncate the 2 vlans in a single port, with this the routing problem was solved.

2 REPLIES 2
Kind of a big deal ww
Kind of a big deal

Re: Static routes Meraki MX-100

you activate the routes in the table of a next hop?

 

and then they are deactivated in the mx?

 

can you give a example?

Highlighted
Conversationalist

Re: Static routes Meraki MX-100

Hi,

 

I have already solved the problem, for some reason, the Meraki did not support the configuration of 2 ports in different vlans. What I did was to truncate the 2 vlans in a single port, with this the routing problem was solved.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.