cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Static routes Meraki MX-100

SOLVED
Conversationalist

Static routes Meraki MX-100

Hi,

 

I have a problem, I am implementing a mx-100 with static routes with different next hop according to the destination. The fact is that when you activate the routes in the table of a next hop the others are deactivated

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Conversationalist

Re: Static routes Meraki MX-100

Hi,

 

I have already solved the problem, for some reason, the Meraki did not support the configuration of 2 ports in different vlans. What I did was to truncate the 2 vlans in a single port, with this the routing problem was solved.

View solution in original post

2 REPLIES 2
Highlighted
Kind of a big deal
Kind of a big deal

Re: Static routes Meraki MX-100

you activate the routes in the table of a next hop?

 

and then they are deactivated in the mx?

 

can you give a example?

Highlighted
Conversationalist

Re: Static routes Meraki MX-100

Hi,

 

I have already solved the problem, for some reason, the Meraki did not support the configuration of 2 ports in different vlans. What I did was to truncate the 2 vlans in a single port, with this the routing problem was solved.

View solution in original post

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.