Site-to-site VPN to AWS

Solved
SteveDW
Here to help

Site-to-site VPN to AWS

Is there a way to create a site-to-site VPN from a Meraki MX100/250 to AWS without purchasing a vMX? I've seen a few articles about configuring the MX SD-WAN site-to-site with third party routers such as SonicWall and Azure. Thanks in advance.

1 Accepted Solution
alemabrahao
Kind of a big deal
Kind of a big deal

Yes, look at this:

 

https://ritcsec.wordpress.com/2018/08/12/a-visual-guide-to-setting-up-a-meraki-to-aws-site-to-site-v...

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

View solution in original post

4 Replies 4
alemabrahao
Kind of a big deal
Kind of a big deal

Yes, look at this:

 

https://ritcsec.wordpress.com/2018/08/12/a-visual-guide-to-setting-up-a-meraki-to-aws-site-to-site-v...

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
SteveDW
Here to help

alemabrahao, 

 

Thank you so very much for your quick response. I really appreciate it. Such wonderful help! Please enjoy your weekend!

GreenMan
Meraki Employee
Meraki Employee

Bear in mind that the non-Meraki VPN tunnels (i.e. Meraki at one end only), created this way are straightforward secure, point-to-point connections;   you don't get the same resilience and traffic engineering capabilities (SD-WAN, basically) that you get through deploying VMX in AWS and using AutoVPN (MX at both ends).

Shubh3738
Building a reputation

Go with VMx, It make your network simpler and no- dependent, for any site location if you have- to DC.

 

Its look like SD WAN connectivity after the deployment of the VMx on AWS. (either same or different vpc).

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels