Site to Site VPN and DHCP

SOLVED
Skeating
Here to help

Site to Site VPN and DHCP

Hello

I'm new to Meraki and have a question involving the MX68 and DHCP. Assume a situation where there are two MX68s, (A and B) one at each site. Each has 3 VLANs that mirror each other. The MX68s are connected by Site-to-Site VPN, forming one network. If I setup DHCP on each VLAN on MX68 "A", as I understand it the DHCP will not be able to send an IP to anything on the VLANs on MX68 "B". Or can an IP be sent, and if so how?

 

Thanks

1 ACCEPTED SOLUTION
ww
Kind of a big deal
Kind of a big deal

No . Subnets cant be the same when they are using vpn. And you cant run dhcp if the mx dont has the subnet assigned to a vlan.

 

 

View solution in original post

1 REPLY 1
ww
Kind of a big deal
Kind of a big deal

No . Subnets cant be the same when they are using vpn. And you cant run dhcp if the mx dont has the subnet assigned to a vlan.

 

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels