I wanted to know if the Meraki firewall can support secondary IP addresses on a single interface. I wanted to redo the current LAN IP address scheme from 192.168.x.x scheme to 10.x.x.x space. I have about 80 devices the current 192.168.69.x network. I know in the past I have done this using Cisco routers and other vendor technologies. Does the Meraki have this capability? As an example; if my current LAN is configured with an 192.168.69.1/24 and the devices on that network are using 192.168.69.2-254 assigned addresses, I would like to change the current IP scheme from a 192.168.69.0/24 to 10.69.69.0/24. This would mean my secondary address would be 10.69.69.1/254. Changing the usable host addresses to be 10.69.69.2-254. I understand the firewall policies would change, I am just curious if the Meraki MX 250 has this capability.