SITE-TO-SITE VPN between MX and FritzBox 7530

FabrizioF
Here to help

SITE-TO-SITE VPN between MX and FritzBox 7530

Hi, someone has tried to connect with VPN SITE TO SITE between a MX and Fritz Box 7530?
thanks in advance

 

Fabrizio

8 REPLIES 8
ebrger
Here to help

could you solve the problem or have you managed it? I also currently fail at this problem.
Maybe you can help.

Unfortunately not
If I have news I'll update you

Grzegorz
Here to help

Config on FritzBox side:

 

 

 

vpncfg {
        connections {
                enabled = yes;
                conn_type = conntype_lan;
                name = "VPN Name";
                always_renew = yes;
                reject_not_encrypted = no;
                dont_filter_netbios = yes;
                localip = 0.0.0.0;
                local_virtualip = 0.0.0.0;
                remoteip = 0.0.0.0;
                remote_virtualip = 0.0.0.0;
                remotehostname = "dyndns or ip";
                keepalive_ip = 192.168.1.1 local ip of MX;
                localid {
                        fqdn = "dyndns or ip FritzBox";
                }
                remoteid {
                        fqdn = "dyndns or ip MX";
                }
                mode = phase1_mode_idp;
                phase1ss = "all/all/all";
                keytype = connkeytype_pre_shared;
                key = "here put pre shared key";
                cert_do_server_auth = no;
                use_nat_t = yes;
                use_xauth = no;
                use_cfgmode = no;
                phase2localid {
                        ipnet {
                                ipaddr = 192.168.5.0 Private subnets of FritzBox;
                                mask = 255.255.255.0;
                        }
                }
                phase2remoteid {
                         ipnet {
                                ipaddr = 192.168.1.0 Private subnets of MX;
                                mask = 255.255.255.0;
                        }
                }
                phase2ss = "esp-aes256-3des-sha/ah-no/comp-lzs-no/pfs";
                accesslist = "permit ip any 192.168.1.0 255.255.255.0";
        }
        ike_forward_rules = "udp 0.0.0.0:500 0.0.0.0:500", 
                            "udp 0.0.0.0:4500 0.0.0.0:4500";
}

 

 

 

 

 

 

 

 

Config on MX Side:

Public IP: Public Ip of FritzBox

RemoteID: DNS address of the Fritzbox
Private Subnet: Ip/Subnet of the Fritzbox

PSK: PSK which must be the same of both side

ICMP ping on MX must be set to Any in Firewall section

 

IPsec policies:

Zrzut ekranu 2022-01-27 o 11.19.01.png

Thank you, i will try it. Can you post an example, info of the other setting of Meraki? I'm afraid that I'm mixing something up. What values do you enter where exactly? Thanks a lot

Zrzut ekranu 2022-01-27 o 11.58.21.png

i still don't quite understand what values are what, am i understanding correctly?:
Meraki
Name: Connection Name, won't matter
Public IP: IP of Meraki-MX
RemoteID: DNS address of the Fritzbox
Private Subnet: Ip/Subnet of the Fritzbox
PSK: PSK which must be the same

Fritzbox
localid {fqdn = "dyndns or ip";}: DNS address of the Fritzbox
remoteid {fqdn = "dyndns or ip";: Public IP of the MX
phase2localid: IP network of the Fritzbox
phase2remoteid: IP network of the MX

I ask because I can't see it clearly from your screenshots

MX:

Public IP: Public Ip of FritzBox

RemoteID: DNS address of the Fritzbox
Private Subnet: Ip/Subnet of the Fritzbox

PSK: PSK which must be the same of both side

 

FRITZ
localid {fqdn = "dyndns or ip";}: DNS address of the Fritzbox
remoteid {fqdn = "dyndns or ip";: Public IP of the MX
phase2localid: IP network of the Fritzbox
phase2remoteid: IP network of the MX

 

Grzegorz
Here to help

ICMP ping on MX must be set to Any in Firewall section

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels