cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Route an entire VLAN over specified WAN?

Highlighted
Here to help

Route an entire VLAN over specified WAN?

Good morning all,

 

Do any of you know how to route an entire VLAN over a specified WAN port? I have about 75 devices I need to send out a different IP address and see that it is possible. Does anyone know how to do that without specifying 75 individual IP addresses? Is it possible to do a x.x.x.0/32 entry in flow preferences and have it work?

 

thanks

2 REPLIES 2
Highlighted
Kind of a big deal
Kind of a big deal

Re: Route an entire VLAN over specified WAN?

Yes, but based on ip. For example

Source 10.10.10.0/24     dest: any    uplink: wan2 

Highlighted
Kind of a big deal
Kind of a big deal

Re: Route an entire VLAN over specified WAN?

@bayleafmedia  the information from @ww is perfect if you are routing traffic to a second physical WAN port, hopefully that is what you wanted, as the MX doesn't allow routing more than one internal IP address to a secondary external IP address on a WAN port.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.