Regarding Security Zone in Meraki MX240

raj_2024
New here

Regarding Security Zone in Meraki MX240

Hi,

I have a MX-240 and i want to migrate from the existing Sophos firewall to this Meraki. I have not found any option of 'Security Zone' like other firewall. In our existing firewall (Sophos), to configure policy we have to mention Security zone (like Trust to Untrust/ LAN to DMZ) and each interface is considered as a Zone. So as we are planning to migrate from Sophos to Meraki we have to shift all the service with correct policies.

 

Need your suggestion and way out of this issue.

 

4 Replies 4
ww
Kind of a big deal
Kind of a big deal

Like you already noticed meraki mx doesnt work like that.

Take a look here for a example of segmentation

https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/Creating_a_DMZ_with_the_MX_Security...

raj_2024
New here

Thanks for the info. But let's say we need to configure multiple zones (4/5), in that case how we can achieve this?

 

 

alemabrahao
Kind of a big deal

The MX is not like a traditional firewall.

 

Check it out.

 

https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/Creating_a_DMZ_with_the_MX_Security...

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
PhilipDAth
Kind of a big deal
Kind of a big deal

You use the same process as creating the DMZ but repeat.

 

I do agree, Meraki is not as nice in this area.

Get notified when there are additional replies to this discussion.