Prioritizing traffic the internet over all other V-LANs on Meraki MX ?

Solved
Raji
Here to help

Prioritizing traffic the internet over all other V-LANs on Meraki MX ?

Hi Friends,

 

Looking for an assistance, To make the newly created vlan a separate V-LAN with priority QoS access to the internet over all other V-LANs. This is especially for Sunday morning access to upload the stream. Pls advise to proceed this. Appreciate if you provide steps / documents / material to accomplish this. 

 

Info :

MX Model : MX84

Only 1 Internet service / connection available at Meraki MX ( Internet Port 2 ).

1 Accepted Solution
alemabrahao
Kind of a big deal
Kind of a big deal

In my opinion, the best way to do this is to create Group Policies and then apply them directly to the VLAN interface.

https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Creating_and_Applying...

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.

View solution in original post

6 Replies 6
alemabrahao
Kind of a big deal
Kind of a big deal

In my opinion, the best way to do this is to create Group Policies and then apply them directly to the VLAN interface.

https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Creating_and_Applying...

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
Raji
Here to help

Thanks for sharing this, Routing is mandate one for this ?. 

 

Regards, 

alemabrahao
Kind of a big deal
Kind of a big deal

Sorry, I don't understand what routing has to do with this. Can you elaborate on your question please?

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
PhilipDAth
Kind of a big deal
Kind of a big deal

You could look at creating a traffic shaping rule and marking traffic from that VLAN as high priority.

Security & SD-WAN/SD-WAN & Traffic Shaping

https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/SD-WAN_and_Traffic_Shaping#Traffic_...

PhilipDAth_0-1715633727786.png

 

PhilipDAth
Kind of a big deal
Kind of a big deal

Brash
Kind of a big deal
Kind of a big deal

As stated above, the key to this one is to create separate VLANs on the MX, and then use Traffic Shaping rules to set the priority (which applies to traffic exiting the WAN interface).

Get notified when there are additional replies to this discussion.