Ping API missing "Source IP Address" parameter

SOLVED
IgorIris
Here to help

Ping API missing "Source IP Address" parameter

Hi, 

I'm looking into  ping API /devices/{serial}/liveTools/ping/{id} in order to mimic something similar to this screen

IgorIris_0-1673175800051.png

According to the API documentation I have no way to choose from which VLAN the ping being sent 

IgorIris_1-1673176279943.png

Any idea if there is a way to make the ping from particular destination using this or any other available API?

1 ACCEPTED SOLUTION
RaphaelL
Kind of a big deal
Kind of a big deal

From what I can see this endpoint was developped for all products.  

 

The screenshot showed is probably from a MX , so I would think that we need another endpoint just for MX to allow a source IP as an input.

View solution in original post

6 REPLIES 6
RaphaelL
Kind of a big deal
Kind of a big deal

From what I can see this endpoint was developped for all products.  

 

The screenshot showed is probably from a MX , so I would think that we need another endpoint just for MX to allow a source IP as an input.

ww
Kind of a big deal
Kind of a big deal

Switch can also have different svi's

RaphaelL
Kind of a big deal
Kind of a big deal

Are you sure that you can select the SVI on the live tools of the MS ?  Because I can't :

 

RaphaelL_0-1673201051693.png

 

ww
Kind of a big deal
Kind of a big deal

Yes.

But maybe you cant see it on a ms120, because it cant do routing only dhcp relay

Thank you for the reply!  I would like to raise a feature request for that, can you suggest the right channel ?

CptnCrnch
Kind of a big deal
Kind of a big deal

Just Give Feedback and / or get in touch with your local Meraki rep.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels