[Newbie here] Can MX64 work simultaneously as a VPN concentrator and NATranslator ?

Solved
mpat
Here to help

[Newbie here] Can MX64 work simultaneously as a VPN concentrator and NATranslator ?

I am thinking of buying (and installing) a MX64 at a simple and small customer location, that I am expected to support remotely.  But I need to understand if it can fulfill my two requirements below >>>

1 - I need to securely access two local vlans at  remote customer's site i.e. Outside-in mgmt access. If it helps, I do have an existing Anyconnect client on my Macbook. 

2- At the same time, both those internal customer VLANs need to 'see' the internet and hence NATing required.i.e. inside out NAT'ing

 

Can MX64 do both things simultaneously ? I am confused between the passthrough/Concentrator mode v/s Routed mode and how they fit into my fulfilling my requirements.

1 Accepted Solution
KarstenI
Kind of a big deal
Kind of a big deal

In this scenario you would use the routed mode which gives you both NAT and also AnyConnect access on the public interface. Be aware that AnyConnect needs a separate license-subscription.

But I would go for the MX67, This device is only slightly more expensive and will have longer support than the MX64 which is already End-of-Sale.

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.

View solution in original post

4 Replies 4
KarstenI
Kind of a big deal
Kind of a big deal

In this scenario you would use the routed mode which gives you both NAT and also AnyConnect access on the public interface. Be aware that AnyConnect needs a separate license-subscription.

But I would go for the MX67, This device is only slightly more expensive and will have longer support than the MX64 which is already End-of-Sale.

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.
mpat
Here to help

Great. Thanks for a quick response.

One more clarification : both traffics mentioned in my original post, are going to be isolated, right ? i.e. I don't want the traffic originating from the local LANs, and destined for The Internet (e.g. AWS), to enter my Anyconnect tunnel. 


Regarding Anyconnect license : If I have read it well, my macbook Anyconnect's existing license should allow me to initiate a connection to remote MX64. and the remote MX64 doesn't really ask (or enforce) Anyconnect license - just an 'accept the T&Cs warning' right ?

 

Thanks for the end-of-sale warning. good point. I will look into the End-of-support dates of MX64 and also MX67.

KarstenI
Kind of a big deal
Kind of a big deal

By default there is no isolation. But you can control the traffic with the Firewall-Rules on the MX. And your Windows firewall would be the second line of defence.

 

For AnyConnect the licensing is not 100% clear for external users. But the general rule is that the company owning the VPN-gateway needs to make sure these licenses are valid. And this is regardless if they are enforced or not.

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.
smohsin
Conversationalist

Yes, MX64 can work simultaneously as a VPN concentrator and NATranslator.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels