Meraki

cmr · ‎Apr 7 2022

Security appliance firmware versions MX 16.16.1 changelog

Important notice

While Meraki appliances have traditionally relied on UDP port 7351 for cloud communication and TCP ports 80 and 443 for backup communications, with MX 16 we are beginning a transition to using TCP port 443 as the primary means for cloud connectivity. In order to ensure proper connectivity to the Meraki cloud after this upgrade, please ensure that traffic using TCP port 443 between 209.206.48.0/20 is allowed through any firewalls that may be deployed upstream of your Meraki appliances.
HTTP proxy, which allows default management traffic from MX appliances to be sent through a proxy, is deprecated on MX 16 and higher firmware versions.

Legacy products notice

When configured for this version, Z1, MX60, MX60W, MX80, and MX90 devices will run MX 14.56.

Bug fixes

Corrected a rare issue that could result in Z3(C) appliances failing a connectivity safety check after upgrading to MX 16 and falling back to their previous version.
Resolved an issue that could prevent BGP sessions from forming correctly when 1) the MX appliance was configured to operate in NAT mode and 2) only static routes were configured to participate in the VPN.
Fixed a link negotiation issue that could occur when connecting Ethernet ports on MX100 appliances to SFP ports on other devices.
Resolved an issue that resulted in spurious DHCP log messages.

Known issues

After making some configuration changes on MX84 appliances, a brief period of packet loss may occur. This will affect all MX84 appliances on all MX firmware versions
Due to MX 15 regressions, USB cellular connectivity may be less reliable on some modems
Due to an MX 15 regression, the management port on MX84 appliances does not provide access to the local status page
Client traffic will be dropped by MX65(W), MX67(C,W), and MX68(W,CW) appliances if 1) The client is connected to a LAN port with 802.1X authentication enabled and 2) The VLAN ID of the port is configured to 16, 32, 48, 64, 80, 96, 112, 128, 144, 160, 176, 192, 208, 224, or 240.

If my answer solves your problem please click Accept as Solution so others can benefit from it.

Armelin · ‎May 4 2022

Does this new firmware fix the problems that MX 16.16 already have (High device utilization and vpn interruption)? We already had in our production MX16.16 and we were suggested to downgrade to MX15.44.

JGill · ‎May 4 2022

I would say no, based on the fact that we just rolled all our Z3's back to 15.44. Currently evaluating if we will roll back our MX84's as they seem stable (but see the performance increase).

MerakiJason · ‎May 5 2022

16.16 proved to be extremely unstable for us on an MX250. Also had the same problems with 17.3 and I believe 16.5? Constant disconnects from the cloud. Woudl completely go out to lunch and have to be factory reset. We are finally stable after support locked us back to 15.44. I've been through 3 new RMA MX250s and done countless factory resets. What a mess. I have a bunch of MX65 and MX68 running 16x and they work fine but no way on earth I'd load this on a 250 after the last 3 weeks of problems I've been dealing with.

cmr · ‎May 5 2022

I know it does seem a bit risky these days, our MX250 pair have been running 16.15 since it came out and we haven't upgraded yet to 16.16 due to issues posted here...