Network usage

SOLVED
RonW
Conversationalist

Network usage

We recently connected WAN2 to our MX250.  I have it doing load balancing.

 

In Appliance Status there is a network usage graph and wanted to confirm that it showing the throughput for each WAN and not the total throughput. I know it's balancing so they should be showing the same.

 

So in my case peak with be 450 Mbps per WAN and not 450Mbps in total across both WAN's

 

Capture.PNG

 

 

Thank you

1 ACCEPTED SOLUTION
DarrenOC
Kind of a big deal
Kind of a big deal

Hi @RonW , the graph is showing the total per WAN link.  WAN1 being the darker blue and WAN 2 the light blue line.

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

View solution in original post

2 REPLIES 2
DarrenOC
Kind of a big deal
Kind of a big deal

Hi @RonW , the graph is showing the total per WAN link.  WAN1 being the darker blue and WAN 2 the light blue line.

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
cmr
Kind of a big deal
Kind of a big deal

@RonW indeed you have 300-400Mb on each link.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels