Multiple Subnets on Native VLAN (MX Firewall)

nixnexus
New here

Multiple Subnets on Native VLAN (MX Firewall)

Hi all,

 

I have a subnet that I need to specify but can't since duplicate VLAN IDs are not allowed. I need subnets 10.0.0.0/12 and 10.41.0.0/23 to be on default native VLAN.

 

The issue is I have static routes set that sits in between those two subnets (subnets 10.34.0.0/16, 10.35.0.0/16, etc).

 

How can I tackle this?

 

Thanks for any advice you all can offer

2 REPLIES 2
cmr
Kind of a big deal
Kind of a big deal

@nixnexus Why can you now have the two subnets on separate VLANs?  Having two subnets on one VLAN, though possible for a number of simple network devices, is highly not recommended as it will not operate as you anticipate on many more complex devices.

PhilipDAth
Kind of a big deal
Kind of a big deal

You can't do this.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels