Migrating to new hardware

[Raffi]

We're replacing an MX67 with an MX75 to get better throughput. We want to keep the configuration the same. Is there a process to do this?

[Inderdeep]

Hope this will helpful for you 

https://documentation.meraki.com/MX/Other_Topics/MX_Cold_Swap_Replacing_an_Existing_MX_with_a_Differ...

[KarstenI]

Yes, just replace it. The config "lives" in the cloud and gets pushed to the new device when you remove the old one and add the new one.

You only have to adjust the VLAN-to-port mapping and re-enable AutoVPN.