Hi guys
Im looking some suggestion.
On a costumer network I had firewall ASA5508 and this is connected to Catalyst and works, the point is because I need to replace this Catalyst for one Meraki MS120.
From ASA5508 I use the next config with sub interfaces.
GigabitEthernet1/4.226 10.0.226.254 YES manual up u
GigabitEthernet1/4.228 10.0.228.254 YES manual up u
Vlan 226 its for internet Data and vlan 228 its for device administration so the point its manage this MS120 with some ip for vlan 228.
I don’t know how config this MX120 or what physical connection I need because this MS has Manage Port.