This error appeared on newly installed MX75: This device is using a DHCP IP address from VLAN 0 instead of using configured VLAN 1 . History is that previous network equipment owned by soemone else so we took equipment out and installed/created a new network, Everything seems to work but this error. Previous installation had the Meraki ms120-24 directly connected to the ISP. Config now is:
ISP
MX75
MS120-24
10 MR46E AP
The ISP is still handing out dhcp . We turned off dhcp in the MX75. Do we need a static IP from the ISP?
Solved! Go to solution.
Your WAN is probably configured with VLAN, just leave it blank.
Your WAN is probably configured with VLAN, just leave it blank.
Thanks for your help. I made the change and the error cleared within 3 minutes and the network stayed up.
If I change it to blank will it know the network down. I have users on it so I may have to make the change after hours.
Sorry, typos today. Knock the network down?
I would change out of hours to be safe
Theoretically not, but if you feel safer, do it outside of business hours.