Hi All,
new setup on meraki.. we have the following outbound rules.
LAN -> Internet allows ports http(s), dns, ntp, ping - very basic
Then i have another rule to with any any allow..
is there a way i can audit what traffic is being passed over the any any allow rule? i see hits but unable to determine what ports/dest IPs are still going out.
no syslog configured at this stage as in POC testing atm.
thanks
You have to enable the syslog configuration.
Explaining better, you need to send the logs to a syslog server, the dashbord does not have detailed information.
In release 18.2, you could use Firewall Logging: https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/Firewall_Logging
thanks for the info.. guess i will configure syslog then...
ah.. i like the logging tool option.. but we are running version 18.107.2
if i were to upgrade, what is the most stable release in 18.2 to use?
many thanks
Latest rc is MX 18.211.0.1