cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Meraki MX Site to Site (Auto VPN) Requirement

SOLVED
Amiel
Conversationalist

Meraki MX Site to Site (Auto VPN) Requirement

Hi Everyone,

 

The scenario is that we currently have a project for 3 offices, all offices are being assigned by our local ISP with a Dynamic IP address. We wanted to utilize Meraki MX67C for the main office and Z3c for both local branches (devices were considered due to the low number of users (1 PC on the branch)) to establish Auto VPN. 

 

Now as per reviewing the documentation, we might have a problem with Unfriendly NAT due to CGNAT being provided by our ISP. Is there a way to still push through with this project? 

 

Will a reboot (or disabling and re-enabling VPN) connection help us in this case to re-establish UDP flow?

 

We can probably ask to have the main office get the static IP address but as for the other 2 branches, we might have to stick with the Dynamic IPs provided.

 

Thanks and regards.

1 ACCEPTED SOLUTION

Accepted Solutions
PhilipDAth
Kind of a big deal

Re: Meraki MX Site to Site (Auto VPN) Requirement

It usually "just works".  You wont know for sure until you try, but more than likely you wont need to do anything special.

View solution in original post

2 REPLIES 2
PhilipDAth
Kind of a big deal

Re: Meraki MX Site to Site (Auto VPN) Requirement

It usually "just works".  You wont know for sure until you try, but more than likely you wont need to do anything special.

View solution in original post

Amiel
Conversationalist

Re: Meraki MX Site to Site (Auto VPN) Requirement

Thanks ! @PhilipDAth 

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.