Meraki MX Site to Site (Auto VPN) Requirement

[Amiel]

Hi Everyone,

The scenario is that we currently have a project for 3 offices, all offices are being assigned by our local ISP with a Dynamic IP address. We wanted to utilize Meraki MX67C for the main office and Z3c for both local branches (devices were considered due to the low number of users (1 PC on the branch)) to establish Auto VPN. 

Now as per reviewing the documentation, we might have a problem with Unfriendly NAT due to CGNAT being provided by our ISP. Is there a way to still push through with this project? 

Will a reboot (or disabling and re-enabling VPN) connection help us in this case to re-establish UDP flow?

We can probably ask to have the main office get the static IP address but as for the other 2 branches, we might have to stick with the Dynamic IPs provided.

Thanks and regards.

[PhilipDAth · Accepted solution]

It usually "just works".  You wont know for sure until you try, but more than likely you wont need to do anything special.

[Amiel]

Thanks ! @PhilipDAth