Hi Folks,
Can some one pls help out here??
I have implemented a new setup in one of our offices where i've deployed MX-250 security appliances as firewalls. During the implementation, i encountered an issue with establishing HA connectivity between the 2xMX-250 devices. Our office has two ISP connections, so i configured ISP1 subnet 113.X.X.234/29 on the MX-A WAN1 interface and ISP2 subnet 154.x.x.85/29 on the MX-A WAN2 interface. Similarly, i configured the same IPs on MX-B, but it is showing a duplicate IP address error. I don't understand why the same IPs of both WAN1 and WAN2 interfaces can't be accepted if we are configuring the two MX devices in Active-Passive mode.
Additionally, I tried configuring MX-warm spare with VIP for each ISP, but I still encountered the same error. The status of both MX devices is showing an orange indication, even though their WAN IPs are pinging from the internet. I'm not sure which device is responding to the ICMP requests.it would be great help if someone can help me in this scenario.
I have attached topology for understanding the setup.
Thanks!!