MX85 Uplinks

Solved
Eyad2411
Here to help

MX85 Uplinks

Dear Team,

 

The MX85 has 4 dedicated WAN uplinks, 2 x 1GbE SFP ports and 2 x RJ45 1GbE ports.

 

My Question is, Can I implement the 4 WAN Links to be Active at the same time?

or it is going to be 2 uplinks as Active and 2 as Passive?

 

the same question is over MX75 in case of 3 Uplinks.

 

Thank You in Advance.

1 Accepted Solution
CptnCrnch
Kind of a big deal
Kind of a big deal

Unfortunately not, only 2 uplinks can be used

View solution in original post

5 Replies 5
CptnCrnch
Kind of a big deal
Kind of a big deal

Unfortunately not, only 2 uplinks can be used

Inderdeep
Kind of a big deal
Kind of a big deal

@Eyad2411 : You can use only two from the 4 uplink ports

https://documentation.meraki.com/MX/MX_Installation_Guides/MX85_Series_Hardware_Installation_Guide 

Regards/Inder
Cisco IT Blogs awarded in 2020 & 2021
www.thenetworkdna.com
GIdenJoe
Kind of a big deal
Kind of a big deal

Indeed, WAN1 has two interfaces and WAN2 has two interfaces and you have to select which one to use for each WAN.

MilesMeraki
Head in the Cloud

Not at this stage; I've been told in later firmware releases more than 2 active WAN links will be supported for SDWAN purposes.

Eliot F | Simplifying IT with Cloud Solutions
Found this helpful? Give me some Kudos! (click on the little up-arrow below)
GIdenJoe
Kind of a big deal
Kind of a big deal

While that would be awesome, I don't see that happening before any official announcement.
I.E. don't bet on it.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels