MX85 Uplinks

[Eyad2411]

Dear Team,

The MX85 has 4 dedicated WAN uplinks, 2 x 1GbE SFP ports and 2 x RJ45 1GbE ports.

My Question is, Can I implement the 4 WAN Links to be Active at the same time?

or it is going to be 2 uplinks as Active and 2 as Passive?

the same question is over MX75 in case of 3 Uplinks.

Thank You in Advance.

[CptnCrnch · Accepted solution]

Unfortunately not, only 2 uplinks can be used

[Inderdeep]

@Eyad2411 : You can use only two from the 4 uplink ports

https://documentation.meraki.com/MX/MX_Installation_Guides/MX85_Series_Hardware_Installation_Guide 

[GIdenJoe]

Indeed, WAN1 has two interfaces and WAN2 has two interfaces and you have to select which one to use for each WAN.

[MilesMeraki]

Not at this stage; I've been told in later firmware releases more than 2 active WAN links will be supported for SDWAN purposes.

[GIdenJoe]

While that would be awesome, I don't see that happening before any official announcement.
I.E. don't bet on it.