MX68W and static routes

Solved
Mju
Here to help

MX68W and static routes

Hi there

 

I have a new MX68W and want to send rfc 1918 ip addresses to a MPLS interface.

 

 

Is it true that the MX68W only supports 2 static routes ?

1 Accepted Solution
Mju
Here to help

I think it works now, but sometimes i got some errors with many red lines..

But after some testing i got all static routes now....

View solution in original post

4 Replies 4
NolanHerring
Kind of a big deal

I'm not aware of a limitation of 2 static routes. Where are you getting that information from?
Nolan Herring | nolanwifi.com
TwitterLinkedIn
PhilipDAth
Kind of a big deal
Kind of a big deal

@NolanHerring is correct.  Their is no practical limit on the number of static routes.

 

It has a limit of two WAN interfaces - which is perhaps where that number has come from.  But it sounds like your MPLS circuit will be connected via a LAN port anyway.

Mju
Here to help

I think it works now, but sometimes i got some errors with many red lines..

But after some testing i got all static routes now....

Indman
Comes here often

what if we have MX in concentrator mode and links are connected on WAN ports.

In this way, can we add multiple routes towards WAN interfaces ?

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels